With over nine representatives and factories in Europe, Asia, and Australia, Exel is the leading composite (or GRP) profile manufacturer in the world with business towards industrial end use. PT. Putranata is Exel's authorized distributor for Indonesia.
The core of the operations is based on own, internally developed composite technology, product range based on it and a strong market position in selected segments with a strong quality and brand image. The personnel's expertise and high level of technology play a major role in Exel Composites' operations.
Exel Composites are used for these critical applications:
- Cable Support Systems (Ladders & Trays)
- Platforms/Columns and Frame Bracing, Foot Brackets and Columns
- Floor Gratings and Stair Treads
- Access Ladders
- Hand Rail Systems
- Water Infusion and Continued Contact Areas
The Main Benefits of using Composites material:
Corrosion Resistance - Superior compared to stainless steel, in particular with saline, chlorin, or H2S which occur in offshore environments.
Tension & Compression Strength - Approx. 20 times stronger than steel with much greater safety factor.
Density & Weight - About 20% lower than steel for the same thickness; significantly reducing handling requirements.
No Deformation - Composites do not deform under high loads.
Low Thermal Conductivity - Only 1/60 that of a steel product; preventing the effects of heat and fire.
Non-Sparking/Frangeable - Composites can be installed in any hazardous area without the need to shut down costly process.
Excellent Insulators - Do not conduct electricity therefore do not cause signal interference and do not require earthing.
Properties Flexibility - Can be tailored with the proper selection of the right resins. Weathering and fire resistant characters can be enhanced. All classes of materials can also be supplied in options which provide superior anti-slip, anti-sparking, and anti-pitting applications.
Very Low Installation Costs - Typically 30-40% less than installing steel. Composites are easily cut and drilled using metal-working tools. Unlike steel, composites do not need to be deburred. Cut and drilled edges do not need repairing with galvanizing paint.
Low Whole Life Cost - Typically in excess of 30 years. Composites are maintenance free.
For inquiries, please email us at pamexel@cbn.net.id
